Compare WebP exports from a still AVIF
Admin ·
Write a still WebP with adjustable quality and alpha. Choose WebP quality and set the maximum dimension if the destination needs a smaller image.
Compare the same scene at two settings
Convert a 65 × 41 AVIF at the initial quality setting. Download it, then lower quality and run it again without changing the dimensions. Compare a sharp diagonal edge and a region of flat color at the same zoom. The size shown beside each result is the actual encoded byte count.
Inspect the alpha edge
Check a translucent edge over both a light and a dark surface. WebP can retain a soft alpha edge while its color data changes with the quality setting. Check both the color bleed along the edge and the shape of the transparent area.
Select a representative still for a delivery test
Start with a frame containing both smooth areas and high-contrast edges. If the AVIF contains motion, choose a still in the source application first. A WebP of a single rendered frame cannot carry the original sequence timing.
After downloading, open the WebP directly in the target browser and compare the displayed dimensions with the source. This separates an encoding difference from CSS resizing on the page.
Common questions
How do I compare quality fairly?
Use one source and keep the dimensions and rotation fixed. Change only quality, download both files and inspect the same region.
Does an AVIF burst become an animated WebP?
The tool accepts still AVIF images. Each accepted file makes a separate still WebP.