Audio and video guides

Check the Savings Report and Reopen a Batch Audio ZIP

·

A shared audio setting can shrink one source and enlarge another. Review each file’s measured result and check the ZIP before replacing any originals.

Batch Audio Compressor

Compare a WAV and a compact recording in one batch

Download the six-second stereo WAV, which is 384,044 bytes. Create a smaller MP3 from that same WAV using the measured 128 kbps result in Audio Compression Comparison and give it a different base name. Add both files to Batch Audio Compressor.

Choose PCM WAV. Set WAV bit depth to 8 bit and WAV sample-rate cap to 22.05 kHz. The practice WAV stays at 16 kHz. Its 96,000 frames and two channels give 192,000 audio bytes, and the saved WAV is 192,078 bytes with its headers. The compact 128 kbps MP3 grows when decoded and exported to those PCM settings.

Open Batch Audio CompressorDownload the six-second stereo WAVGenerate the measured 128 kbps practice MP3Python WAV reader and PCM metadata fields

Check both byte counts and the contents of the ZIP

Choose Compress batch and compare the original and output byte counts on both rows. Download smaller files as ZIP. Check that it contains the smaller practice WAV. Keep the original MP3, whose converted version is larger and is omitted from the ZIP.

Open the ZIP and check that each included file has a strictly smaller output than its own original. Open the worked WAV in an audio reader and check for two channels, a 16 kHz sample rate, 8-bit PCM and six seconds of audio. The ZIP container has its own overhead, so compare the ZIP file itself if the delivery limit applies to the archive.

Open Batch Audio CompressorPKWARE ZIP file format specificationPython WAV reader and PCM metadata fields

Choose a shared MP3 setting for a different delivery

For a group of recordings that should play in one application, choose a constant-bitrate MP3 preset and check playback on a representative file from the batch. If some originals are already small, keep those alongside any smaller outputs. Repeat with a lower rate only when the new copies still meet your listening needs.

Open Batch Audio CompressorFFmpeg MP3 encoder settings

Common questions

Which source size should I use to calculate saved bytes?

Subtract the output bytes for a row from that row’s original bytes. A negative difference means that conversion would enlarge that file.

How do I decide whether to keep a skipped input?

Keep the original when it already meets the delivery requirements. If the recipient needs a different format, convert the file on its own and check the resulting size and playback.

Sources

Put it into practice.

Related guides