Audio and video guides

Verify a Large Video Fits a 100 MB Cap

·

Use the 100 MB preset when your source is larger than the receiver accepts. The measured download must meet the file-size limit and retain the parts of the video you need.

Compress Video to 100 MB

Compare the source and download

Open a supported source between 100 and 150 MB that is no longer than three minutes. If you are trying the workflow for the first time, load the practice video to see the same controls and byte comparison on a known 744,408-byte source.

Choose Source height and keep audio enabled. Use WebM or select MP4 if the destination requires it. Choose Compress to 100 MB and read the byte count in Video size result. Confirm the result is within 100,000,000 bytes, and check the first and last scenes and their sound.

Open Compress Video to 100 MBDownload the four-second practice videoWebM Project container guidelines

Relate duration to the starting bitrate

A two-minute video at a 100 MB limit has about 6,667 kbps in total before reserving room for audio and container data. With one mono audio track, the workspace starts the picture near 6,136 kbps after reserving seven percent of the budget and 64 kbps for audio. It measures the actual result after encoding.

If the saved file exceeds the cap, try a lower maximum height and check the smallest text you need to read. If the source already fits and opens in the receiving application, keep it.

Open Compress Video to 100 MBFFmpeg codec and bitrate options

Common questions

Does the preset try to make the file exactly 100 MB?

It treats 100,000,000 bytes as a ceiling. The file may be much smaller depending on the duration and complexity of the content.

How long can the source be?

The current browser workspace accepts one video up to three minutes and 150 MB, within the displayed resolution limit.

Sources

Put it into practice.

Related guides