Arrange two-inch portraits on a four-by-six sheet
Admin ·
Decide how much blank space the printer needs at the edges before planning the number of copies. A borderless layout uses the full physical sheet.
Fit six copies edge to edge
Set the sheet width to 6 inches and height to 4 inches. Use 2 × 2 inch copies, zero margin and zero gap. At 300 PPI the sheet is 1800 × 1200 pixels and each copy is 600 × 600.
Leave room for a printer margin
Change the minimum margin to 0.1 inch on every side. The available rectangle becomes 5.8 × 3.8 inches. Only two complete copies fit across and one down. The pair is centered in the sheet, so the actual blank border can exceed the minimum.
Check a printed copy with a ruler
Choose the correct paper size and actual-size printing. Borderless modes can enlarge the image. Measure the sides of a printed copy before using the sheet for an application.
Plan a sheet with space for cutting
A six-copy sheet leaves adjacent edges touching. If your printer needs a clear border or you want a cut between photos, test the layout mathematically before printing. Across a row, two copies use four inches and the single gap adds its own width. Padding outside the group is shared equally on opposite edges.
| Settings on 6 × 4 inch paper | Whole copies | Blank space around the group |
|---|---|---|
| 2-inch photos, no margin or gap | 3 by 2 | No outside border. Check borderless printing for enlargement. |
| 2-inch photos, 0.1-inch minimum margin and gap | 2 by 1 | 4.1 inches of the sheet width are used, leaving 0.95 inch on each side. |
| 1.5-inch square photos, 0.1-inch margin and gap | 3 by 2 | The group uses 4.7 × 3.1 inches. Measure one copy before cutting the others. |
Common questions
Does a gap reduce the number of copies?
Yes when the available width or height cannot accommodate the gap and the next full copy. Check the grid count after each change.
Can I rotate the sheet?
Swap the sheet width and height. The tool recalculates the grid while keeping each photo upright.