PDF guides

Read the preflight findings for a print proof

·

Check the page boxes and resources before sending a print proof. A PDF can have an orientation, a finished trim and a separate area for bleed on the same page.

PDF Preflight Checker

Find the two short edges in the sample

Choose Load example. The report finds two pages and distinguishes the PDF 1.4 file header from the 1.7 catalog declaration.

Open Pages. Page 1 is portrait, 186 × 262 pt after its 90° turn. Its displayed trim is 149 × 227 pt. Bleed margins in the original PDF coordinates are left 2.47 mm, bottom 2.82 mm, right 3.53 mm and top 4.59 mm. The first two fall below the 3 mm comparison used in Checks.

Page 2 is landscape, 240 × 150 pt, with unavailable bleed measurements. The report needs explicit trim and bleed boxes to calculate the four margins.

Download the asymmetric press PDF proofISO 32000-1, PDF 1.7 standard hosted by Adobe

Compare repeated artwork at two placements

The same 300 × 200 pixel image is drawn twice on page 1. One placement spans one inch on each of its image axes and reports 300 × 200 DPI. The second spans two inches along the image’s horizontal axis and one inch along the other, so it reports 150 × 200 DPI.

Open Fonts. The Helvetica resource has no declared embedded program. The two ProofTriangle entries use a TrueType program with a subset prefix. The display lists declared resources, including a font inside a form XObject.

Download the asymmetric press PDF proofISO 32000-1, PDF 1.7 standard hosted by Adobe

Record the color and document declarations

Open Color and metadata. The proof has an sRGB IEC61966-2.1 output intent with an RGB ICC header and three declared components. The document information title is Asymmetric press proof.

Download the JSON report. Keep its findings with a copy of the original proof and compare the measurements with the print provider’s requirements. A bleed box describes area. Review the artwork separately to confirm it extends to the intended edges.

Download the asymmetric press PDF proofISO 32000-1, PDF 1.7 standard hosted by Adobe

Common questions

Why can the same image appear twice with different DPI?

Effective resolution follows each placed size, so a larger placement of the same pixels has a lower DPI on the enlarged axis.

Why might an image not have a measured placement?

The report handles supported page and form XObject draws. Inline images and image placements beyond unsupported content or inspection limits remain unavailable.

Sources

Put it into practice.

Related guides