Make an exact-size placeholder for a prototype slot
Admin ·
A useful mockup placeholder tests the specific space your real image will occupy. Match the pixel dimensions, add a short label that helps reviewers identify the slot, and choose whether the background should cover the page behind it.
Match a 640 × 360 design slot
Choose the Thumbnail size preset. Keep Pattern at None, fill Center label with Workshop photo and keep Print dimensions on image turned on. Use the default dark fill or set a project color.
Download PNG and check its 640 × 360 dimensions in an image viewer. Preview it within your mockup. The center shows the slot name, with a smaller 640 × 360 label near the lower-right edge.
See the page through a transparent grid
Keep the same dimensions. Clear Center label, turn off Print dimensions on image, turn on Transparent background and choose Grid. Select a pattern color that contrasts with the background in your mockup.
Download again and put the file over a colored page. The line pixels carry the chosen pattern and the gaps show the page below. Toggle Transparent background off for an opaque version with the same grid and size.
Test the same idea in a short banner slot
Choose Leaderboard to get 728 × 90 and type a two-line label. The label scales to fit the limited height. Remove extra words if it is too small in the prototype.
Use the same pixel dimensions when replacing the placeholder or give the layout a fixed aspect ratio. Compare the image box before and after replacement to spot an unexpected layout change.
Common questions
Why is the dimensions label smaller on a short image?
The dimensions text scales with the available height so it can fit below the center label, including in short leaderboard-style layouts.
Does Randomize change the size of the result?
No. It changes the color settings and pattern while you keep the same dimensions and center label.