Fit a landscape video into a portrait frame
Admin ·
A tall output frame gives you a choice about where to put the extra space. Use the four-color sample to compare a complete picture with a crop that favors one side.
Center the entire landscape image
Load the video example. Its 320 × 240 frame contains four color panels. Enter an output width of 120 pixels and a height of 200 pixels, then choose Fit with solid background and keep the background black.
The image is scaled to 120 × 90 pixels. The remaining 110 pixels of height divide into two 55-pixel bars. The center still contains red, green, blue and yellow. Resize the video, download the MP4 and confirm the file dimensions in a media player.
Download the four-color video exampleFFmpeg scale filterFFmpeg pad filter
Fill the same portrait frame with the right edge
Keep the 120 × 200 output and switch to Crop to fill. Move the horizontal crop position to the right end or drag the box to the right edge. The selected source area is 144 × 240 pixels, with a left offset of 176.
The new file should be green above yellow across the full frame. Check the footage around one second and listen for the tone. The picture area changes, while the clip timing stays near 2.50 seconds.
Download the four-color video exampleFFmpeg scale filterFFmpeg crop filter
Apply the same choice at a publishing size
For a vertical frame, choose the 1080 × 1920 preset. A square frame uses 1080 × 1080 and the landscape preset uses 1920 × 1080. You can enter other even sizes when a delivery brief specifies them.
Use a solid color for predictable edges, or try a blurred background to keep the full source with color around it. Check any title, face or subtitle near the edges before choosing Crop to fill.
Common questions
Why does the position control stop moving on one axis?
The selected crop already uses the full source width or height on that axis. Move the crop on the axis where the source extends beyond the rectangle.
Will a bigger frame add detail to a small clip?
Resizing adds output pixels by interpolation. The information available to fill those pixels still comes from the original footage.