Color and design guides

Check a Printed Color Swatch Card

·

A printed palette gives you a physical reference for comparing colors. Use named chips and include the color values people need to reproduce the design.

Swatch Card Generator

Create and measure a four-color A4 card

Keep the four sample colors and change Card title to Harbor paper samples. Set Paper size to A4, Columns to 2 columns and Label placement to Inside swatch. Enable HEX, RGB and HSL.

Create and download the PDF. Open its document properties and look for a single 210 × 297 mm page. You should see two chips in the first row and two beneath them. Try selecting the Deep water and Dune labels in the PDF viewer.

Create and measure a four-color A4 card
First rowHEXRGB
Deep water#19375125, 55, 81
Dune#D9975F217, 151, 95

CSS Paged Media page size names and dimensionsCSS Color 4 sRGB and alphaWCAG 2.2 contrast ratio definition

Move the values below each chip for a Letter print

Switch to US Letter and Below swatch. Create another PDF and confirm the new page is 8.5 × 11 inches. The values now appear on the paper area below each chip. Keep the selected paper size in the print dialog and print at Actual size if you need fixed dimensions.

Try replacing the first color with rgba(0, 0, 0, 0.5). The printed chip and its HEX label use #808080, the sRGB result blended over white and rounded to a whole channel value.

CSS Paged Media page size names and dimensionsCSS Color 4 sRGB and alpha

Common questions

Can I print the palette without color codes?

Turn off HEX, RGB and HSL to keep only the chip names. Leave individual names blank when you want an unmarked chip.

Why might a chip look different on paper?

The PDF uses RGB values. The printer, paper, ink and lighting affect the physical result. Use the PDF alongside a test print for comparison.

Sources

Put it into practice.

Related guides