Choose a video frame at a cut and save it as an image
Admin ·
To show the exact picture after a cut, enter a timestamp and read the actual frame time before downloading. The extractor decodes the first frame at or after the requested file time.
Save selected half-size JPEGs from an interval
Load the four-second color sample. Choose Every few seconds, set First timestamp to 0.5 and Interval to 1 second, then choose JPEG and Half width and height. Capture interval frames.
Check the four images. The time labels should read 0.500, 1.500, 2.500 and 3.500 seconds. The first two images should be red and the last two blue. Each should measure 480 × 270 pixels, half the displayed width and height of the original.
Clear Include in ZIP on the second and fourth images, then download the ZIP and open both files. The timestamps in their names identify the two retained moments. For a diagram or fine lettering, try PNG at full size and compare the rendered lines before deciding.
Four-second video with a color change and soundFFprobe container and stream documentation
Capture the picture on each side of a cut
Choose Load video example and keep PNG selected. Set Timestamp to 1.250, label the frame Before and choose Add timestamp. Add 00:02.010 as After. Press Capture queued frames to see both images.
Before shows red at 1.250 seconds. After shows blue. The 24 fps frame grid places the first available frame at 2.042 seconds when rounded to three decimals. Both measure 960 × 540 pixels. Download the ZIP to check those colors and labels in the two PNG files.
Four-second video with a color change and soundFFprobe container and stream documentation
Find the frame time from the source preview
Scrub the source video, pause and press Use playback time. Use Previous frame and Next frame to step through the source’s recorded frame timestamps. Capture frame and read the reported time to confirm the actual downloaded picture.
If capture returns no frame near the end, move the request earlier. The last frame may start before the last timestamp displayed by the player.
Choose an image format for the still
Save PNG for legible diagrams or flat colors where edge artifacts matter. JPEG offers three quality choices for photographic stills. WebP is another compact format for browsers and editors that support it.
Open the downloaded image and compare its dimensions and rotation to the extracted preview. Portrait rotation is applied during decoding. The converter may adjust pixel dimensions to make a square-pixel image from video stored with non-square pixels.
W3C Portable Network Graphics specificationFFmpeg stream selection and stream copy
Common questions
Can I capture from a video the browser will not play?
The browser player and local decoder support different input codecs. If the video streams can be read, try a typed timestamp and check the captured image.
Does a PNG recover detail lost during video compression?
It preserves the decoded image without an additional JPEG pass. The source video’s existing compression and resolution still determine its detail.
Does a one-second interval capture all frames?
It requests a frame once per second. Lower the interval to request more images, up to 300 times per job. At low frame rates, adjacent requests can resolve to the same picture.