Audio & Video · Made a little simpler

Audio Equalizer Visualizer

Watch the frequency spectrum of a local recording during playback. Boost or cut bass, midrange or treble, compare the results and download the adjusted audio as WAV.

Free to useNo account neededProcessed on your device
Your workspaceProcessed on your device

Add this tool to your website

Paste this code into your page to add the tool and a visible ToolMellow credit link.

HTML embed code
Preview embed

Audio Equalizer Visualizer: how to use it

  1. Open local audio or load the stereo sample. Choose a channel and time range for analysis, or play the clip with the live spectrum and select bars, line or filled display.
  2. Set the low, mid and high gains. Preview changes to graph the measured frequencies after processing, then switch the playback between the original and adjusted versions.
  3. Check the clipping indicator and lower gains if needed. Download the full equalized clip as a 16-bit PCM WAV.

Limits and notes

One browser-decodable mono or stereo file, up to 24 MB and three minutes. Each band is adjustable from −12 to +12 dB. The full WAV is rendered at 48 kHz and retains one or two channels.

How your privacy works →

Audio Equalizer Visualizer: common questions

Are the lines showing the filter settings or the recording?

They show measured frequency levels in the selected section of the original and equalized recording. The separate live view follows the audio being played.

Why is a clipping message shown?

Some processed samples exceed full scale. The PCM WAV clamps them to the nearest limit. Lower a gain and preview again for more headroom.

Does the spectrum range trim the WAV?

The range and channel select the measurements. The WAV retains the full timeline and all source channels accepted by the workspace.

Guides