Audio Noise Reducer
Reduce steady background noise on your device. Learn a noise profile from the opening, or set a fixed spectral floor, then compare the WAV or FLAC export.
Reduce Background Hiss in Audio
Audio Noise Reducer: how to use it
- Choose a local audio file or download the noisy stereo WAV sample. Set Start and End in seconds to isolate a troublesome passage.
- Start the selection with about 0.2 seconds of background noise alone to learn its profile, or choose a manual floor. Try 24 dB of reduction with a −32 dB floor for the sample.
- Select WAV or FLAC, run Reduce noise, and listen to the finished output before downloading it.
Limits and notes
One supported WAV, MP3, AAC/M4A, Ogg, FLAC or audio-only WebM file up to 100 MB and 15 minutes. Supports 8–192 kHz input and up to eight channels, with a 64 MB decoded output budget. Exports 16-bit WAV or FLAC at the source sample rate and channel count. Learning a profile needs a selection of at least 0.35 seconds.
How your privacy works →Audio Noise Reducer: common questions
What if the selected audio starts with speech or music?
Start at a quieter part of the file or select the manual floor. Learning from audible speech or music can reduce parts of the foreground signal.
What kind of background noise can it reduce?
The spectral filter is intended for fairly steady broadband noise such as hiss. Listen for unwanted changes when the background or desired signal varies rapidly.
What does the noise floor control?
A higher, less negative noise floor makes the filter treat more energy as background. Raise it in steps and check quiet speech or music along with a pause.
Where are the audio and results processed?
The browser reads and filters the selected file on this device. You can preview and download the result locally.