Microphone test

Your workspaceProcessed on your device
Device idle

Start the test to check your microphone.
Local signal meter · no audio is sent to a server.

Nothing is captured until you start.RMS ≤ -100 dBFS · session peak ≤ -100 dBFS

dBFS describes digital sample level, not sound pressure. The waveform is not routed to speakers. Target latency is a browser setting, not a measured round-trip delay. Missing settings are marked “Not reported”.

A few things to know.

RMS and peak values use digital dBFS, not calibrated sound pressure. Near-full-scale samples can indicate possible clipping. Recordings are capped at 10 seconds / 10 MB and stay in memory unless downloaded. Settings may be unreported; latency is a target, not a measured round trip. Device access requires HTTPS or localhost.

  1. Start the test and grant access when your browser asks.
  2. Inspect the live result and choose another device if needed. Optionally record and download a short sample.
  3. Stop the test to release this page’s device access.