Image guides

Check Tiled Text and Logo Marks on Two Photo Proofs

·

Use a pair of color proofs to compare a diagonal text stamp with a repeating transparent logo. Both sources have a 260 px shorter side, so the same mark size and tile gap carry across orientations.

Bulk Watermark

Check diagonal text in wide and tall proofs

Select Load practice photos. Choose Text and enter Harbor Studio with white lettering. Set Mark size to 8%, Angle to −30°, Gap to 20% and Opacity to 35%.

Observe the preview for repeated, angled text. Select PNG, apply the mark and open both images from the ZIP. Both images retain their dimensions while the text has a similar horizontal scale.

Harbor wide color proofHarbor tall color proofWHATWG Canvas transformations

Measure the spacing of the transparent logo grid

Choose Logo and select Load sample logo. Set Mark size to 10%, Angle to 30°, Gap to 20% and Opacity to 50%. The 60 × 60 source logo becomes a 26 × 26 px box before rotation. The gap is 52 px, so neighboring centers lie 78 px apart along the rotated grid.

In each PNG, the middle logo is centered. The nearest logo toward the lower right is about 68 px right and 39 px down. The transparent corners let the proof colors show through.

Measure the spacing of the transparent logo grid
SettingValueEffect on a 260 px shorter side
Mark size10%26 px logo box
Gap20%52 px extra space before the next box
Opacity50%Half-opacity logo pixels

Transparent practice diamond logoHarbor wide color proofHarbor tall color proofWHATWG Canvas transformations

Check both entries before sharing

Download the logo version and open both entries. Inspect the repeated marks at the center and edges. If the watermark distracts from the proof, reduce the opacity. If the empty space is too large, reduce the tile gap.

The ZIP contains new photos with the watermark drawn into their pixels. Select Original to keep JPG, PNG and WebP output formats from a mixed batch. Other supported inputs use PNG in Original mode.

Transparent practice diamond logoWHATWG Canvas transformations

Common questions

Can I use a partially transparent logo?

Yes. Each logo pixel keeps its source transparency and the Opacity setting multiplies the visibility of the whole mark.

Does the tile gap include the logo itself?

The gap is added to the logo box or text measurement. Two grid centers are separated by the size of the mark plus the chosen gap along that axis.

Sources

Put it into practice.

Related guides