Image guides

Sharpen a scan and reduce its print density

·

A scan’s pixel dimensions describe the stored samples. Physical density describes how many samples fit in an inch when printed. Use both measurements to resize without enlarging a scan.

Document Scan Compressor

Reduce a 300-DPI example to 150 DPI

Click Load example to select the 120 × 80 PNG tagged at 300 DPI. Choose Email · 150 DPI and set Text sharpening to Off. Click Compress scans. The result is 60 × 40 at 150 DPI, so the physical width remains 0.4 inch.

The source density label identifies its PNG pHYs field. A PNG stores physical density in pixels per metre and readers may display a slightly rounded DPI.

Reduce a 300-DPI example to 150 DPI
ScanPixelsDensity
Original120 × 80300 DPI
Saved PNG60 × 40150 DPI

W3C PNG Third Edition, pHYs physical pixel dimensionsITU-T T.871, JPEG File Interchange Format

Compare sharper text before replacing the scan

Switch Text sharpening to Standard or Strong and compress again. Compare the original and saved previews. The filter increases local contrast around edges and can also enhance grain in the original.

Keep PNG to review the filtered pixels without another lossy color step. Choose JPEG and adjust quality for a color scan when smaller bytes matter more than exact pixels.

W3C PNG Third Edition, pHYs physical pixel dimensionsITU-T T.871, JPEG File Interchange Format

Check physical density before exporting a batch

If the result says Unknown source DPI, the tool keeps the pixel dimensions and writes your chosen output density. Enter an independently known DPI with Source DPI override when you need the resized image to keep its physical scale.

Select Download ZIP for the result files and compression report. For a TIFF with several pages the report identifies the first page used. If the source density is already below the requested density, the saved dimensions and original density are retained.

W3C PNG Third Edition, pHYs physical pixel dimensionsITU-T T.871, JPEG File Interchange Format

Common questions

What happens to sharpness when I choose a lower DPI?

Lower DPI uses fewer pixels for the same physical area. The optional sharpening increases edge contrast after resizing and cannot restore detail absent from the source.

Can I use printed inches to check the example?

Divide pixel width by its DPI. Both 120 ÷ 300 and 60 ÷ 150 equal 0.4 inch.

Sources

Put it into practice.

Related guides