Compare sharpening methods on a printed label
Admin ·
A crisp label includes flat areas and a boundary where the tone changes quickly. Follow that boundary in the example to see how two filters affect the same source pixels.
Check two pixels at the label edge
Load the example. The gray values on row 40 at columns 71 and 72 are 80 and 160, using zero-based coordinates. Select Unsharp Mask, radius 2, amount 100% and threshold 0. The two values become 56 and 184. The filter adds back the difference between the original and a blurred copy.
Compare the immediate-neighbor filter
Select Laplacian with amount 100% and threshold 0. Its four-neighbor measurement changes those same values to 0 and 240. This gives a stronger change at the boundary, with a dark side already at the lowest possible 8-bit value.
Reduce visible outlines
Try amount 50% to halve the added edge difference. Increase the threshold if small variations in blank paper begin to stand out. Compare the edge and the nearby gray area, then save the chosen result.
Common questions
Which filter uses the radius setting?
Unsharp Mask uses the radius of its Gaussian blur. The Laplacian setting always uses the four immediate neighbors.
Why use a higher threshold on a noisy scan?
A higher threshold leaves more small differences alone. Compare the grain in flat areas and the lettering after each adjustment.