Fit an exam portrait within a pixel and byte limit
Admin ·
Copy the requirements from the form before opening your photo. A width in pixels and a maximum in kilobytes constrain two different properties of the download.
Frame a 400 by 500 pixel portrait
For a form requesting 400 × 500 pixels, choose Pixels and enter those values. Use Crop to fill and move the horizontal or vertical position until the face sits inside the frame. Create the layout again after changing a control.
If the portal asks for pixels, check that field in the downloaded JPEG properties. JFIF also stores horizontal and vertical density for printing. A density such as 300 PPI is a separate property from the 400 by 500 pixel raster.
Check the encoded file against the limit
If the form allows 20 KB, enter 20 and choose JPEG. Read the actual byte count after encoding. Inspect the downloaded file at full size for blur around the eyes. If the limit and the required detail cannot both be met, check the form’s accepted alternatives.
Diagnose a rejection that mentions size
Suppose the portal asks for a JPEG at 400 × 500 pixels, between 10 and 20 KB. Open the saved file’s properties and check the width, height and byte count separately. A file with the right shape can still miss either byte boundary. These examples use 1 KB = 1,000 bytes.
| Saved file | What the form would see | What to change |
|---|---|---|
| 400 × 500 JPEG, 19,850 bytes | Inside all three example limits | Inspect the downloaded portrait at full size before submitting. |
| 500 × 400 JPEG, 16,000 bytes | Landscape dimensions | Set width to 400 and height to 500. Check that the top of the head stays inside the new crop. |
| 400 × 500 PNG, 12,500 bytes | Correct dimensions and bytes, different format | Select JPEG and export again. Renaming a PNG leaves the original file format intact. |
| 400 × 500 JPEG, 8,400 bytes | Below the example minimum | Remove the ceiling and regenerate from the original. If the result is still too small, check the portal’s instructions. |
Common questions
Does changing PPI make a pixel-based form accept a larger image?
With pixel units the width and height stay fixed. JPEG density records the intended print scale.
What if my form lists both a minimum and a maximum size?
Compare the downloaded byte count with both limits. The maximum-size control only checks the upper bound.