Fit a wide handwritten signature inside a narrow box
Admin ·
A signature can have a tall initial, a low flourish and nearly invisible dots. Check those marks when choosing how much of the original scan to keep.
Calculate the space around the strokes
A 600 × 100 scan fitted into 300 × 80 becomes 300 × 50 pixels. The remaining 30 pixels are split into 15 above and 15 below. Use white padding for a scan on white paper.
For a form asking for pixels, read the width and height in the exported PNG properties. Its physical pixel dimensions also describe a print scale. A viewer can display a density value with a small rounding difference while the box remains exactly 300 × 80 pixels.
Inspect the downloaded writing
Open the exported image at its original pixel size. If a JPEG makes a faint line hard to see, compare a PNG when the form permits that format. Large empty margins in the original scan will also be scaled down with the writing.
Decide whether to crop the paper first
Suppose your signature occupies just the middle 300 × 50 pixels of a 1200 × 400 scan. Fitting the sheet inside 300 × 80 scales it by 0.2, leaving the writing only 60 × 10. If the strokes look tiny, first crop the paper around the writing in an image cropper. Leave room for dots and the end of the longest stroke. Then choose that cropped file here.
| Source selected | Scale into 300 × 80 | Approximate writing size |
|---|---|---|
| Full 1200 × 400 scan | 0.20 | 60 × 10 pixels |
| 360 × 90 crop around the same writing | 0.83 | 250 × 42 pixels |
Common questions
Why does my signature look small?
The entire source, including blank paper, must fit inside the box. Crop surplus paper from the source while leaving space around every pen stroke.
Does the signature become an electronic signing certificate?
The download is an image of your writing. The filing system determines how it can be used.