Image guides

Add a faded reflection and check the gap

·

A reflection starts with the original edge and recedes into transparency. Use the small practice PNG to tell the original, the gap and the reflection apart.

Image Reflection Generator

Build the five-row practice example

Select Load example and Create reflection. The source is 4 × 2 pixels. With placement Below the image, length 100% and a one-pixel gap, the saved image is 4 × 5 pixels.

Open the PNG in a pixel inspector and compare the rows from top to bottom. The original image keeps its color and opacity, and the duplicate starts with its bottom row.

Build the five-row practice example
Output rowContentsExpected alpha at second column
1–2Original image255, then 128
3Transparent gap0
4Reflected bottom edge at 60%77
5Far edge of the fade0

W3C Portable Network Graphics Third Edition, alpha

Calculate the near-edge opacity

The second pixel in the original bottom row starts at alpha 128. The reflection starts at 60% of that alpha. 128 × 0.60 is 76.8, which rounds to 77 in the PNG.

A longer reflection has additional rows or columns between the same near and far endpoints. A single-pixel reflection uses the near-edge value.

W3C Portable Network Graphics Third Edition, alpha

Move the reflection to the right

Change Reflection placement to Right of the image, then create the reflection again. The original width of four pixels now determines the length. With the same gap, the result measures 9 × 2 pixels.

Check the first visible reflected column after the gap. It is a copy of the rightmost source column with reduced alpha. Reduce the length to fit a smaller area beside the image.

Common questions

What if I need the original without a gap?

Set Gap to 0. The reflection begins at the next row or column after the original.

What does the checkerboard represent?

It previews transparent pixels. The checkerboard itself is outside the saved image.

Sources

Put it into practice.

Related guides