Audio and video guides

Fit a voice recording under 1 MB

·

A tight upload cap can force a choice between keeping both channels and keeping the entire recording. Try the two settings on the same practice recording.

Compress Audio to 1 MB

Compare mono and stereo on a 160-second file

Load the 160-second practice audio. Keep the binary size convention of 1,048,576 bytes. Select Keep stereo and compress. The lowest stereo option on this recording is 96 kbps, which estimates 1,920,000 bytes. The measured result should exceed the selected limit.

Clear Keep stereo and compress again. The ladder can use 48 kbps mono at 24 kHz. Its data estimate is 960,000 bytes. Download the measured MP3 and check that it is smaller than 1,048,576 bytes and still about 160 seconds long.

NIST definitions for bytes, megabytes and mebibytesFFmpeg LAME MP3 encoder bitrate options

Listen for the channel change

The practice file has a 440 Hz tone on the left and a 660 Hz tone on the right. The mono result combines the two. If position or separate speakers matter for your source, keep stereo and choose a larger byte budget.

Listen near the end of a real recording as well as its first few seconds. Low bitrate and sample rate can make detail harder to hear even when the full duration is saved.

FFmpeg LAME MP3 encoder bitrate options

Copy the receiving form’s limit

If the form caps uploads at one million bytes, use Decimal before encoding. Its smaller cap changes which near-boundary files qualify. Compare the shown byte count with the form’s requirement.

NIST definitions for bytes, megabytes and mebibytes

Common questions

Will this cut the recording to meet the cap?

It keeps the full duration. If the enabled MP3 settings cannot fit, it reports the smallest checked file size.

Why did the 160-second export become mono?

At this limit, the available stereo settings for the practice recording exceed the byte cap. The fitting option mixes the left and right into one channel.

Sources

Put it into practice.

Related guides