Cut the middle cue from a three-tone recording
Admin ·
A cue recording contains three tones in sequence. Cut a section of the middle tone so a recipient can use it without hearing either adjacent cue.
Mark the interval inside the middle cue
Download the six-second WAV sample and open it in Audio Slicer. Select Show waveform. The three groups have progressively higher amplitudes. The middle cue extends from 2 to 4 seconds.
Enter 2.25 for Start and 3.75 for End. Select Preview selected clip. You should hear a steady cue for about one and a half seconds, with a different pitch in each ear if you use stereo headphones.
Download the three-tone stereo WAV sampleWHATWG HTML, media timeline and playback
Verify the 16-bit stereo cut in the WAV file
Choose WAV and create the clip. Download it and open it in an audio editor. The file should contain 24,000 sample frames at 16,000 Hz, for 1.5 seconds. The left tone is about 700 Hz and the right tone about 900 Hz.
If either neighboring cue is audible, compare the Start and End values with the source waveform and move them farther inside the middle group.
Download the three-tone stereo WAV sampleMicrosoft, PCM waveform sample packing
Use MP3 when the recipient needs a smaller clip
Keep the same selection. Change Audio format to MP3 and choose 128 kbps. Create a new clip. The decoded tones should remain separated by channel, with a smaller file and encoder padding around the selected sound.
Use WAV if a downstream edit depends on the exact sample count. MP3 players differ in how they present and trim encoder delay when reporting a duration.
FFmpeg, libmp3lame bitrate optionsMicrosoft, PCM waveform sample packing
Common questions
Why does a long file show sliders without a waveform?
The waveform is restricted to short browser-decodable sources to bound decoding memory. Use the start and end fields, sliders, or native playback controls for longer sources.
Can a 24-bit WAV stay 24-bit after the cut?
The WAV export writes 16-bit PCM. Use a higher-bit-depth audio editor if a downstream workflow requires 24-bit data.
Sources
Put it into practice.
Related guides
- Morse code spacing and audio guide
- Check a Trimmed MP4 with Its Audio Track Removed
- Verify Timing and Pitch after Speeding Up Video
- Compare MP3 File Size at 128 and 320 kbps
- Check an Audio Cover and Waveform MP4
- Check a Stereo FLAC Audio Conversion
- Verify a Quiet Interval in a Stereo Waveform
- Compare a Bass Boost and Treble Cut
- Reduce Background Hiss in Audio
- Measure Tempo With a Click Track
- Fit a Voice Recording Under 1 MB
- Fit Stereo Audio Under 5 MB
- Fit a Full Audio Recording Under 10 MB