Audio and video guides

Verify a quiet interval in a stereo audio waveform

·

Use a waveform to locate a pause or see whether a loud sound affects one or both stereo channels. Zoom into a time interval to compare decoded sample peaks, then save the values if you need to mark an edit in another application.

Audio Waveform Visualizer

Compare the same first second on each channel

Load the four-second example. Enter 0 in Start and 1 in End, select Left and choose Update view. The range peak is about −14 dBFS. Choose Right without moving the range. Its peak is about −20 dBFS.

The difference is approximately 6 dB. The left channel’s peak amplitude is roughly twice the right channel’s. This describes the peak sample waveform. It does not determine which channel a listener will perceive as twice as loud.

Four-second stereo analysis sampleW3C Web Audio AudioBuffer

Confirm silence and read the saved intervals

Set the range from 2.1 to 2.9 seconds, then update the view. Expect a flat center line and Silence in the peak readout. Try the other channel at the same timestamps. The example is quiet on both channels there.

Open Download waveform CSV. The first start is 2.100000 seconds and the last end is 2.900000 seconds. The minimum and maximum amplitudes are zero through that interval. Channel 1 is left and channel 2 is right.

Four-second stereo analysis sample

Export a transparent waveform at a chosen size

Return to 0–1 second on the left channel and choose Filled. Set the image to 1200 × 320 pixels and turn on Transparent background. Download the PNG for a slide or the SVG when you need a vector graphic.

The image contains the chosen channel and range with the selected colors. Expect an empty background around the shape. To check a time against the source, click the chart or move Playback position before exporting. The playback marker stays out of the image.

Four-second stereo analysis sample

Choose a smaller window for an edit point

The plot keeps up to 600 intervals. The full clip gives context, while a shorter range groups fewer samples into each bar. Use the range controls to locate a peak more precisely, and listen before making a cut.

The browser decodes into a 48 kHz analysis buffer. A resampler can introduce a small oscillation near an abrupt edit. Check within the gap if you want to distinguish sustained low-level signal from an edge.

W3C Web Audio decoding and sample rate

Common questions

What do negative values in the waveform mean?

They are samples below the zero axis. Their distance from zero indicates amplitude. A silent interval has samples at zero.

Can this waveform confirm the original file’s sample rate?

It reports the 48 kHz analysis rate. Check the source header in a media inspector to confirm its stored sample rate.

Sources

Put it into practice.

Related guides