Convert stereo tones without changing the FLAC samples
Admin ·
A stereo cue file can be encoded losslessly for further editing or encoded at a chosen bitrate for distribution. Match the format to what the recipient can open and whether the decoded samples must stay exact.
Keep the full six seconds in FLAC
Open the three-tone WAV sample. Leave Start at 0 and End at 6, select FLAC and leave Mix down to mono clear.
Convert and download the result. Reopen the FLAC in an audio editor. It should contain two channels at 16,000 Hz and 96,000 sample frames per channel. Decoding the FLAC produces the same samples as the 16-bit input WAV.
Download the three-tone stereo WAV sampleIETF RFC 9639, Free Lossless Audio Codec
Compare Ogg Vorbis and AAC M4A at a target bitrate
Keep the same selection and choose Ogg with a target of 128 kbps. Encode again, then repeat with M4A. Read the files’ codec information. The Ogg uses Vorbis and the M4A uses AAC. Both are stereo at 44,100 Hz.
Listen to the transitions at two and four seconds. The pitches should stay close to the source while the codecs use perceptual compression. The measured average bitrate can differ from the target.
Download the three-tone stereo WAV sampleXiph.Org Foundation, Vorbis I specificationFFmpeg, audio encoders and bitrate options
Check whether one channel suits the recipient
Use Mix down to mono only when the receiving workflow needs one channel. For this sample, the two tones in each section combine in the same channel. Listen to that version before sending it.
For further editing, use the stereo WAV or FLAC as the working copy. Avoid repeated lossy conversions when keeping the source sound is important.
Download the three-tone stereo WAV sampleIETF RFC 9639, Free Lossless Audio Codec
Common questions
Does Ogg identify the codec by itself?
Ogg is a container. This converter places Vorbis audio in its Ogg output.
Does M4A contain an image track?
The M4A export contains AAC audio only.
Sources
Put it into practice.
Related guides
- Slice a WAV Cue and Check Both Channels
- Choose the Right Interval for Video to MP3
- Verify a Voice WAV and Audio Extract Locally
- Check an Audio Cover and Waveform MP4
- Verify a Quiet Interval in a Stereo Waveform
- Compare a Bass Boost and Treble Cut
- Normalize Audio to LUFS or dBFS
- Downsample WAV Without Changing Pitch
- Measure Tempo With a Click Track
- Change MP3 Tags and Preserve Audio
- Compare FLAC Levels and PCM Samples
- Choose Opus or Vorbis in Ogg
- Compare M4A-to-MP3 Sample Rates
- Compare MP3 and PCM WAV Exports