Audio and video guides

Compare two FLAC levels and verify identical decoded samples

·

A FLAC level changes how the encoder stores repeated patterns. A smaller file can represent precisely the same audio, which you can check on the supplied recording.

FLAC Compressor

Compare level 0 and 8 on the same FLAC

Choose Load FLAC practice audio. The tool prepares a level-0 FLAC from the six-second stereo WAV at 16 kHz and 16 bits. Select level 0 and compress. Download that version before changing settings.

Select level 8 and compress the same source again. Compare the measured byte counts. Each result should show two channels, 16,000 Hz and 16-bit PCM. The practice source also has a PCM checksum, which should match in both results.

To verify the audio independently, decode both FLACs as signed 16-bit PCM at their original rate and channel count. Compare the decoded bytes. The six-second stereo sample has 96,000 samples in each channel.

Six-second stereo tone sample used in the practice audioRFC 9639 FLAC format and STREAMINFO metadataFFmpeg audio codec and rate-control options

Read the recorded stream settings

FLAC STREAMINFO stores the sample rate, channel count, bit depth and total sample count when known. It can also store an MD5 checksum of the decoded PCM. If the source has no checksum, the workspace reports the verified format and channel settings.

An already compressed music recording may save fewer bytes than the practice audio. If a new result grows, use the existing file for the smaller attachment.

RFC 9639 FLAC format and STREAMINFO metadata

Keep the original when tags matter

The saved FLAC contains the audio stream. The tool omits tags and embedded artwork. Use the original when you need its catalog metadata.

RFC 9639 FLAC format and STREAMINFO metadata

Common questions

Does choosing a high level change my samples?

No. Each supported level writes lossless FLAC with the same PCM. The level affects encoding work and file size.

What happens to a 24-bit input?

A supported 24-bit FLAC stays 24-bit. The workspace checks its bit depth after encoding.

Sources

Put it into practice.

Related guides