Audio and video guides

Record a short WAV and compare it with a video extract

·

A new voice note uses your microphone. An existing video already contains sound and can be read as a file. Show which source you expect and check the number of channels before downloading.

Voice Recorder and Audio Extractor

Record a two-second voice note from your microphone

Select Record voice, then Start recording. When the browser prompts you, choose whether to allow access. Say a short phrase, watch the recorded duration approach two seconds and select Stop recording.

Replay the result and check that the phrase begins and ends clearly. Download recording WAV and inspect the file as one channel, 16-bit PCM at the sample rate shown. The recorded duration comes from the captured samples.

W3C Media Capture and StreamsW3C Web Audio API, AudioWorkletMicrosoft, PCM waveform sample packing

Discard a test take and confirm the microphone stops

Start another recording and select Cancel recording while it runs. Check that the browser’s microphone indicator stops for this tab and the canceled take has no download.

If you embed the recorder on another site, the host must delegate microphone access. The browser still asks you to authorize capture.

W3C Media Capture and Streams

Extract a stereo cue from a local video file

Choose Extract from video and open the three-color MP4 sample. Enter 2.25 for Start and 3.75 for End. Leave WAV and stereo selected, then Extract audio.

The downloaded result should contain 1.5 seconds of stereo PCM at 16,000 Hz. The audio comes from the video's soundtrack. The microphone stays inactive during extraction.

Download the three-color MP4 timing sampleMicrosoft, PCM waveform sample packingFFmpeg, media stream selection

Common questions

Why is the voice recording mono while the extracted WAV is stereo?

Microphone capture mixes to one channel. WAV extraction keeps the selected source audio channels unless you choose mono.

Can I hear the microphone through my speakers while recording?

Listen after stopping. The tool keeps the audio graph silent during capture to avoid speaker feedback.

Sources

Put it into practice.

Related guides