Audio and video guides

Compare a stereo MP3 before and after reducing its bitrate

·

The included recording has a 440 Hz tone on the left and a 660 Hz tone on the right. Use it to check what the size and channel settings do before compressing a longer recording.

MP3 Compressor

Compress the stereo tones at 128 kbps

Select Load audio example, choose 128 kbps and leave Mix down to mono cleared. Compress the clip. The source and result should both report about four seconds and two audio channels.

Compare the actual file sizes. The lower constant bitrate gives a smaller output on this fixture. Listen to the export and check that the two tones stay separate on headphones.

Download the four-second stereo tone recordingFFmpeg codec options and audio and video encoders

Check whether your recording needs stereo

Export the same sample again with Mix down to mono selected. The export has one channel containing both tones. Compare the stereo and mono previews before making that choice for an interview, music track or spatial recording.

FFmpeg codec options and audio and video encoders

Use the downloaded byte count for a size limit

The selected bitrate controls the number of MP3 bits per second. MP3 metadata, encoder padding and the source format can affect the size comparison. For a short clip, some players also show slightly different duration rounding.

FFmpeg codec options and audio and video encoders

Common questions

What does 44.1 kHz mean in the output?

The export uses 44,100 audio samples per second. The output bitrate controls compressed data per second, while the sample rate measures the decoded audio grid.

Sources

Put it into practice.

Related guides