Paper Size Converter
Convert paper dimensions to inches, millimetres, PDF points and pixels. Compare two sheets and calculate the print scale and margins for a centered fit.
Calculating an A4-to-Letter print scale
Dimensions and fit
| Measurement | Result |
|---|---|
| Source dimensions | 210 × 297 mm |
| Source in centimetres | 21 × 29.7 cm |
| Source in inches | 8.268 × 11.693 in |
| Source in PDF points | 595.276 × 841.89 pt |
| Source raster at 300 PPI | 2,480 × 3,508 px |
| Target dimensions | 215.9 × 279.4 mm |
| Fit scale | 94.074% |
| Fitted artwork | 197.556 × 279.4 mm |
| Space on each left and right edge | 9.172 mm |
| Space on each top and bottom edge | 0 mm |
Fit preserves the source proportions and centers the artwork. The margin applies to each edge. Physical measurements and scale are displayed to three decimal places, and raster dimensions are rounded to whole pixels.
Paper Size Converter: how to use it
- Choose source and target sheets, or enter custom dimensions in millimetres. Rotate either sheet as needed.
- Set the minimum margin on each edge of the target and the raster resolution for the source. Toggle enlargement to cap the scale at 100%.
- Read the fit percentage, artwork size and space on each edge. Download the measurements for your print instructions.
Limits and notes
Assumes centered, uniformly scaled artwork. Physical dimensions are nominal sheet sizes. Check printer margins and driver scaling separately. Pixel counts round to the nearest whole pixel at the entered PPI.
How your privacy works →Paper Size Converter: common questions
What is A4 at 300 PPI?
A portrait A4 sheet is 210 × 297 mm. Dividing by 25.4 and multiplying by 300 gives 2,480 × 3,508 pixels after rounding.
Are ISO B5 and JIS B5 the same size?
ISO B5 is 176 × 250 mm. JIS B5 is 182 × 257 mm. Choose the named standard your printer or publisher specifies.